Keywords : Box girder
Shear Strength of Reinforced Fibrous-self Compacted Concrete Box Girder using Recycled Concrete Aggregate
Engineering and Technology Journal,
2021, Volume 39, Issue 8, Pages 1307-1320
Protection of environmental and conservation of natural resources is a fundamental issue in today’s world. In this research, the shear behavior of reinforced concrete box girders with recycled aggregate (RA), steel fiber, and internal diaphragms were investigated. Eleven reinforced concrete box girders with typical longitudinal and transverse reinforcement were tested under two point loading until failure. The RA was prepared by crushing the collected waste of concrete from the laboratory test cylinders and cubes. The experimental variables considered include; RA percent of 50%, 75%, and 100%(replacing from NA), steel fiber with volumetric ratios (Vf) of 0.5%, 1.0%, and 2%, diaphragm numbers (two and three).The test results revealed that the shear strength of the box girders affected by the RA content, the ultimate load was decreased by (32, 25, and 19) % for the (100, 75, and 50) %RA concrete, respectively in compared with the control specimen. In contrast the steel fiber was more effective in strengthening of the RA concrete specimen, for the (Vf) of 0.5%, 1.0%, and 2.0% with non-fibrous 100% RA concrete, the strengthening were (25, 40, and 77) % respectively. Moreover, when 1.0% steel fibers added to the 100%, 75%, and 50%RA concrete respectively, the strengthening were (40 ,45 ,and48 )% compared each with its reference specimen. On the other hand, when two and three diaphragms used, the strengthening for the non-fibrous 100% RA concrete was (6% and 9%) respectively. cracking load, ultimate load, load- deflection, and concrete surface strain has been taken into consideration in this research.