Print ISSN: 1681-6900

Online ISSN: 2412-0758

Keywords : Tensile test


The Effect of PVP Addition on the Mechanical Properties Of [84%LLDPE: 15 %(( 100- X) %PP: X%PVP):1%Basalt Particle] Polymer Blend Composites.

Teeb A. Mohammed; Akram R. Jabur; Sihama E. salih

Engineering and Technology Journal, 2014, Volume 32, Issue 3, Pages 573-585

Polymer blends composites were prepared according to the formula [84%LLDPE:15%((100-X)%PP:X%PVP):1%B.P] with weight ratios selected for X values (0,4,8,12,16 %), as strips by double screw extruder and use press process the strips to prepare the samples according ASTM specification, the mechanical properties were studied for all theprepared samples which are (tensile, flexural, compression, impact, hardness, and creep tests). The results are as following:- results showed increment of mechanical properties as PVP ratio increases except elongation, furthermore the results recorded highest values of fracture strength, young modulus, compressive strength, flexural strength, maximum shear stress, flexural modulus and creep modulus at PVP 8% wt. which are (31.32MPa, 0.14GPa, 27.4MPa,24MPa, 0.6MPa, 1.08GPa and 0.558GPa) respectively.
While the highest values of fracture toughness and hardness recorded at 12% wt. (1.4696Pa√m), and at 4% wt. (56.5) respectively.

One Parameter Composite Semigroups of Linear Bounded Operators in Strong Operator Topology of Schatten Class Cp

Samir Kasim Hassan; Al-Taie M; Al-Malki Anam; Al-Attar Abeer; Mustafa Khaleel Ismael; Fatema Ahmed Sadeq; Radhi A .Zboon; Jehad R.Kider; Samir K .Hassan; Hussain J. M. Alalkawi; Raad H. Majid; Rawaa A. Alomairy; Luma Abdul Ghani Zghair; Hadia Kadhim J.Al-Ogili; Assifa M. Mohamad; Abbas Sheyaa Alwan; Haider L. Aneed; Assim H Yousif; Salema Sultan Salman; Abbas Hussien Miry; Abduladhem A.Ali; Mohammed Zeki Al-Faiz; Sabah N. mahmood; Khansaa Dawood Selman; Shaymaa Tareq Kadhim

Engineering and Technology Journal, 2011, Volume 29, Issue 8, Pages 1463-1470

For semigroups of linear bounded operators on Hilbert spaces, the problem of
being in Cp , 0 Keywords

Effect of Laser Surface Treatment on Mechanical Properties of CK45 Steel

Sabah N. mahmood; Khansaa Dawood Selman

Engineering and Technology Journal, 2011, Volume 29, Issue 8, Pages 1610-1618

The research aims to study the effect of laser surface treatment on mechanical properties of CK45 steel which is widely used in Bolts, Axles Various,Connecting Rods and Hydraulic clamps. Trails of laser hardening were carried out by using CW Nd: YAG laser with different powers 2.7, 3.3, and 4.3 Watt. Mechanical tests were done for the specimens who were used in the research before and after treated by laser such as: Tensile test, Micro hardness. Also grain size measurement and microstructural evaluation were done by using
computerized optical microscope. The results show that improvement in
mechanical properties at laser power 4.3 watt obviously when compared with other laser powers. From tensile test we show that increasing in yield strength, ultimate tensile strength Poisson's ratio and plasticity constant (k). Also decreasing in Young modulus, Rigidity of modulus and strain hardening coefficient (n). While microhardness results show that the highest value was obtained at laser with 4.3
watt power and decreased far from the surface. Metallographic of the specimen show that refining in grains size after the treatment with laser.