Keywords = Mechanical properties
Number of Articles: 86
Mechanical Properties of Unsaturated Polyester Filled With Silica Fume, Glass Powder and Carbon Black
Volume 35, 6A , June 2017, , Page 640-647
Abstract
In this study a polymer matrix composites (PMCs) have been prepared with the aid of ultrasonic wave dispersion method for mixing , using of unsaturated polyester resin with Silica Fume(SF), ... Read More ...
Mechanical and Physical Properties of Nano Carbon Tube with Carbon Fiber Reinforced with Polyester Resin
Volume 35, 5A , May 2017, , Page 465-472
Abstract
In this research, study some physical and mechanical properties of polymernano composites. The polymernano composites based on unsaturated polyester resin reinforced with carbon fibers ... Read More ...
Effect of B4C/Fly Ash Addition on Wear and Mechanical Properties of Al-Cu-Mg Alloy
Volume 35, 4A , April 2017, , Page 301-310
Abstract
This research studied the effect of adding fly ash and boron carbide (B4C) particulates reinforcement on the mechanical properties and wear resistance of Al- 4.5% Cu- 1.18% Mg matrix ... Read More ...
Titanium-Base Nanostructure Coatings for AISI M52 Tool Steel by Gas-Phase Mix Process
Volume 35, 3A , March 2017, , Page 182-189
Abstract
Deposition of Multicomponent hard coatings (Ti-B-N-C) on the molybdenum high-speed tool steel (AISI M52) has been achieved by mixed vapor deposition technique to improve the mechanical ... Read More ...
Improvement the Mechanical and Physical Properties of Epoxy–Polyurethane Matrix Resin by Using Kevlar Fiber and ZnO Particles
Volume 35, 3A , March 2017, , Page 261-266
Abstract
This work focuses on the synthesis of hybrid polymer composite matrix materials prepared from the epoxy–Polyurethane resin (Polyprime EP) as matrix reinforced phase by using (5%, ... Read More ...
Effect of laser surface treatment on the some of mechanical properties of AISI 4130 steel
Volume 35, 2B , February 2017, , Page 85-90
Abstract
In this work the surface of an alloy of AISI 4130 steel is hardened by using CW Nd:YAG laser and then study the effect of laser surface hardening on mechanical properties such as yield ... Read More ...
Effect of SiC Particulate on Glass Fibers Reinforced Polymer Composites in Erosive Wear Environment
Volume 35, 2A , February 2017, , Page 118-123
Abstract
In this study the physical property, mechanical properties and erosion wear of pure epoxy and hybrid composites were studied. Composites were prepared and investigated by Hand lay-up ... Read More ...
Study the Effect of adding Natural Rubber and Polymethyl Methacrylate to the Epoxy Resin on the Quantitative Analysis and its Mechanical Properties
Volume 35, 2A , February 2017, , Page 163-171
Abstract
From polymer blends can be obtained more useful properties compared with single polymer. In this work, polymer blend (Epoxy (EP): Natural Rubber (NR)) with different ratios of NR (0, ... Read More ...
High Performance Concrete Improvement by Styrene-Butadiene Rubber Addition
Volume 34, 12A , December 2016, , Page 2296-2309
Abstract
In this paper, the properties of high performance concretes modified by polymer were studied. Liquid synthetic styrene-butadiene rubber (SBR) was added (5%, 10% and 15%) by weight of ... Read More ...
The Effect of Thermo-Mechanical Treatment on Mechanical Properties & Microstructure for (Cu-Al-Ni )Shape Memory Alloy
Volume 34, 13A , December 2016, , Page 2518-2526
Abstract
This paper aims to study the effect of thermo mechanical treatment in different temperatures of (260 ,280& 300) ◦C on the microstructure and mechanical properties of Cu-14wt%Al-4.5wt%Ni ... Read More ...
Mechanical Performance of CO2 and Autoclave Cured Date Palm Fiber Reinforced eco-mortar Composites
Volume 34, 14A , December 2016, , Page 2754-2765
Abstract
Using nature waste fibers in construction industries had shown important character "environmental friendly" which paid a great interest around the world. The aim of this paper was to ... Read More ...
Fine Aggregate Ratios Effect on Mechanical and Physical Properties of Pervious Concrete
Volume 34, 9A , September 2016, , Page 246-260
Abstract
The porous concrete applications and the process of production in different ways depending on the replacement of fine or coarse aggregate components of research important topics, The ... Read More ...
Comparative Study of Influence Post weld Aging on the Mechanical Properties of Similar Friction Stir Welded Joints for Al 2024-T3 and Al 7075-T73
Volume 34, 3A , March 2016, , Page 588-599
Abstract
The aim of present study is to investigate the effect of precipitation hardening heat treatment at different aging conditions on the mechanical properties and microstructure of similar ... Read More ...
Effect of Applied of Pre-Stresses on Corrosion Behavior of 304 Stainless Steel in 1N H2SO4
Volume 34, 3A , March 2016, , Page 600-612
Abstract
This research is devoted to study the effect of applying different pre-tensile stresses (255,305,355,405,455,505 555 and 605) MPa on the microstructure, hardness and corrosion behavior ... Read More ...
Effect of Hydrocarbon Solutions on Polymer Concrete
Volume 34, 2B , February 2016, , Page 234-242
Abstract
The damaging effect of oil products on concrete besides the high permeability of concretehave made researchers try to improve the properties of concrete exposed to oil products, hence ... Read More ...
The Effect of Ferrite Content on the Thermomechanical and Dielectric Strength Properties of Epoxy Composite
Volume 34, 1A , January 2016, , Page 186-192
Abstract
Different concentrations of cadmium ferrite (2%, 5%, 8%, 10% and 15%) were incorporated into epoxy resin. Cadmium ferrite was prepared by conventional ceramic technique. Composites ... Read More ...
Comparison OF Shear Properties for High Density Polyethylene (HDPE) and Poly vinyl Cloride (PVC) Polymers
Volume 33, 9A , December 2015, , Page 2039-2048
Abstract
The properties that make plastic of direct interest to designers and engineers are its good strength to weight ratio, low manufacturing installation costs, and high durability. The ... Read More ...
The Influence of Quenching Media and Aging Time on Microstructure and Mechanical Behavior of 6061 Aluminum Alloy
Volume 33, 8A , October 2015, , Page 1757-1770
Abstract
Aluminum-magnesium-silicon (Al-Mg-Si) alloys are medium strength, excellent formability, good corrosion resistance and widely used in extruded products and automotive body materials. ... Read More ...
Comparative Study of Some Properties of Two Groups’ Binary Polymer Blends Prepared By a Twin-Screw Extruder
Volume 33, 8A , October 2015, , Page 1971-1985
Abstract
In this paper, the preparation and compare of some mechanical and physical properties of two groups of polymer blends consisting of polyvinyl chloride with polypropylene (PP-PVC) and ... Read More ...
Nano-SiO2 Addition Effect on Flexural Stress and Hardness of EP/MWCNT
Volume 33, 7B , August 2015, , Page 1248-1257
Abstract
Nano-SiO2 with different weight percentage (1,2 ,3, 4 and 5) % wt. , and 3% MWCNT were usedto fabricate nano-SiO2/MWNT/epoxy composite samples by hand layup method. Ultrasonic mixing ... Read More ...
Evaluation Mechanical Properties of Polymer Composites Reinforced by different Metal Powders
Volume 33, 7B , August 2015, , Page 1348-1360
Abstract
This research covers reinforcement of unsaturated polyester resin by metal powders, and studying some of their mechanical properties. The samples were prepared by hand lay-out technique. ... Read More ...
Effect of Plasma Peening on Mechanical Properties and Fatigue life of AL-Alloys 6061-T6
Volume 33, 7A , July 2015, , Page 1667-1679
Abstract
An Investigation of estimated Mechanical Properties of AL-Alloys 6061-T6, which is one of the most commonly used in industrial applications, has been established experimentally. A new ... Read More ...
The Effect of Rolling and Heat Treatment on Mechanical Behavior of 6061 Aluminum Alloy
Volume 33, 6A , June 2015, , Page 1389-1398
Abstract
In this study, the influence of bothheat treatment and cold working (rolling) on the tensile properties andhardness of6061 aluminum alloy sheets was investigated. The solution heat ... Read More ...
Investigation of Tensile and Impact of Composite Materials Reinforced with Natural Materials
Volume 33, 4A , May 2015, , Page 919-933
Abstract
This work focuses on studying the effect of Data Seeds (DS) and Olive Seeds (OS) particles on tensile and impact properties of epoxy resin. Olive and dates seeds powder were added to ... Read More ...
Mechanical Properties for Polymer Hybrid Composites Reinforced by Fibers and Particles
Volume 33, 3A , April 2015, , Page 635-643