Engineering and Technology Journal

Keywords = Carbon Nanotube

Number of Articles: 8
The Effect of the Waste of Materials and Carbon Nanotube on the Concrete Incorporated with Steel Fibers
The Effect of the Waste of Materials and Carbon Nanotube on the Concrete Incorporated with Steel Fibers

Mayada H. Saleem; Farhad. M. Othman; Alla A. Abdul-Hameed

Volume 39, Issue 6 , June 2021, , Page 956-964

https://doi.org/10.30684/etj.v39i6.2018

Abstract
  The addition of agricultural and industrial solid wastes and nanomaterials to concrete combined with steel fibers to improve the mechanical and electrical properties of concrete was ...  Read More ...
Effect of Nano Carbon Tube on the Mechanical and Physical Properties of Composites Based on Resin Route
Effect of Nano Carbon Tube on the Mechanical and Physical Properties of Composites Based on Resin Route

Aseel B. Abdul-Hussein; Emad S. AL-Hassani; Marwa S. Atallah

Volume 36, 4A , April 2018, , Page 410-416

https://doi.org/10.30684/etj.36.4A.7

Abstract
  In this work, the physical and mechanical properties of nano composites are investigate. The nano composites consist of matrix was polyester resin and 3% volume fractions of glass fibers ...  Read More ...
Mechanical and Physical Properties of Nano Carbon Tube with Carbon Fiber Reinforced with Polyester Resin
Mechanical and Physical Properties of Nano Carbon Tube with Carbon Fiber Reinforced with Polyester Resin

M. Subhi; E. S. AL-Hassani; A.B. Abdul-Hussein

Volume 35, 5A , May 2017, , Page 465-472

https://doi.org/10.30684/etj.35.5A.5

Abstract
  In this research, study some physical and mechanical properties of polymernano composites. The polymernano composites based on unsaturated polyester resin reinforced with carbon fibers ...  Read More ...
Nano-SiO2 Addition Effect on Flexural Stress and Hardness of EP/MWCNT
Nano-SiO2 Addition Effect on Flexural Stress and Hardness of EP/MWCNT

E.A. Al-Ajaj; A.Sh. Alguraby; M.K. Jawad

Volume 33, 7B , August 2015, , Page 1248-1257

https://doi.org/10.30684/etj.2015.116689

Abstract
  Nano-SiO2 with different weight percentage (1,2 ,3, 4 and 5) % wt. , and 3% MWCNT were usedto fabricate nano-SiO2/MWNT/epoxy composite samples by hand layup method. Ultrasonic mixing ...  Read More ...
Different Shapes of Carbon Nanotubes via Water Assisted Chemical Vapor Deposition
Different Shapes of Carbon Nanotubes via Water Assisted Chemical Vapor Deposition

Kahtan Kalaf Al-Khazraji; Ali Hussain Ataiwi; Mayyadah S. Abed Al-Fatlawi

Volume 33, 2A , February 2015, , Page 487-499

https://doi.org/10.30684/etj.33.2A.19

Abstract
  Carbon nanotubes with different shapes have been prepared using water assisted chemical vapor deposition technique (WA-CVD). Different thicknesses of nickel layers were sputtered on ...  Read More ...
Preparation of Carbon Nanotube by Pulse Laser Ablation of Graphite Target in Demonized Water
Preparation of Carbon Nanotube by Pulse Laser Ablation of Graphite Target in Demonized Water

Khawla S. khashan; Mayyadah H. Mohsin

Volume 32, 1B , January 2014, , Page 61-71

https://doi.org/10.30684/etj.32.1B.9

Abstract
  In the present work, carbon nanotube was synthesis by pulse laser ablation of graphite target in deionize-water. Fourier Transform Infrared Spectroscopy (FTIR), UV-Visible Spectrophotometer ...  Read More ...
Carbon Nanotube Prepared by Pulse Laser Ablation of Graphite Target in Iso-Propanol Solution
Carbon Nanotube Prepared by Pulse Laser Ablation of Graphite Target in Iso-Propanol Solution

Khawla S. khashan; Mayyadah H. Mohsin

Volume 31, Issue 16 , September 2013, , Page 3078-3089

https://doi.org/10.30684/etj.31.16A.7

Abstract
  In this work carbon nanotube was synthesis by pulse laser ablation of graphite target in Iso-propanol solution. Fourier Transform Infrared Spectroscopy (FTIR), UV-Visible Spectrophotometer ...  Read More ...
Removal of Copper (II) from Wastewater Using Modified Carbon Nanotubes
Removal of Copper (II) from Wastewater Using Modified Carbon Nanotubes

Mohammed Ibrahim; Adnan A. AbdulRazak; Ayad Dari Jaafar

Volume 31, Issue 12 , August 2013, , Page 2228-2241

https://doi.org/10.30684/etj.31.12A.2

Abstract
  In the present work, carbon nanotubes were prepared by Chemical Vapor Deposition (CVD) method, acetylene gas was used as a carbon source. In CVD system, a catalytic growth of CNTs is ...  Read More ...