Print ISSN: 1681-6900

Online ISSN: 2412-0758

Keywords : cutting conditions


Optimization of Cutting Parameters in Milling Process Using Genetic Algorithm and ANOVA (March 2020)

Marwa Q. Ibraheem

Engineering and Technology Journal, 2020, Volume 38, Issue 10A, Pages 1489-1503
DOI: 10.30684/etj.v38i10A.1124

In this present work use a genetic algorithm for the selection of cutting conditions in milling operation such as cutting speed, feed and depth of cut to investigate the optimal value and the effects of it on the material removal rate and tool wear. The material selected for this work was Ti-6Al-4V Alloy using H13A carbide as a cutting tool. Two objective functions have been adopted gives minimum tool wear and maximum material removal rate that is simultaneously optimized. Finally, it does conclude from the results that the optimal value of cutting speed is (1992.601m/min), depth of cut is (1.55mm) and feed is (148.203mm/rev) for the present work.

Estimation of Cutting Tool Wear in Turning using Taguchi Method Depending on Weight of the Removed Tool Metal

Hussam Lefta Alwan; Baraa M.H. Albaghdadi; Mohanned M. H. AL-Khafaji; Asaad Ali Abbas

Engineering and Technology Journal, 2014, Volume 32, Issue 1, Pages 24-33

This paper focuses on using Taguchi method to determine the optimum
turning parameters such as spindle speed, depth of cut, and feed rate, denoted by factor symbols A, B, and C respectively. The effect of cutting parameters on tool wear is depended on the concept of removed weight from the tool metal during machining. The material that has been used as a workpiece is high carbon steel and carbide insert DNMG 443-15 as a cutting tool. Taguchi orthogonal array L9,quality characteristic "smaller is better", and ANOVA were used to achieve the goal of the research. The results obtained showed that spindle speed is the
significant factor of the process followed by the feed rate in terms of their contribution in analysis. The optimum combination of parameters, which was found by applying Taguchi method, is that designated by A2B1C1.