Authors
Abstract
In the present research, efforts are made to develop the properties of PMMA resin that used for upper and lower prosthesis complete denture, by addition four different types of nanoparticles powders, which are fly ash, fly dust, zirconia and aluminum that added with different ratios of volume fractions of (0.01, 0.02 and 0.03) to poly methyl methacrylate (PMMA), cold cured resin (castavaria) is the new fluid resin (pour type) as a matrix. The nano composite and hybrid nano composite for prosthetic dentures specimens, preparation was done by using (Hand Lay-Up) method as six groups which includes: the first three groups consists of PMMA resin reinforced by fly ash , fly dust and ZrO2 nanoparticles respectively, the second three groups consists of three types of hybrid nano composites, which includes ((PMMA:X% fly ash) - (1%Al + 3%ZrO2)), ((PMMA:X% fly dust) - (1% Al + 3%ZrO2)) and ((PMMA:nZrO2) - (1% fly ash+ 3% fly dust)) respectively. As well as, the effect of moisture and UV was taking into consideration in this study. The compression test results shows that the values of compressive strength, compressive elastic modulus, and compressive strength under the effect of accelerated weathering (moisture and UV radiation) increased with the addition of nano powders (fly ash, fly dust, zirconia and aluminum). As well as, the results showed that the maximum values of compressive strength reach to (286.25MPa) for (PMMA + 2%nZrO2) nano composite. In addition, the results showed that the compressive elastic modulus reach to the maximum value (25.4166GPa) in the nano composite material (PMMA + 2%nZrO2). Moreover, the results showed that the compressive strength under the effect of accelerated weathering (moisture and UV radiation) reach to the maximum value to (315MPa) for the nano composite material (PMMA + 3%nZrO2).
Keywords
)
