[1] V. T. Chow, D. R. Maidment, and L. W. Mays, “Applied hydrology (letters),” MacGraw-Hill, 1988.
[2] E. Todini, “Hydrological catchment modelling: past, present and future,” Hydrol. Earth Syst. Sci., vol. 11, no. 1, pp. 468–482, 2007.
[3] N. Noori and L. Kalin, “Coupling SWAT and ANN models for enhanced daily streamflow prediction,” J. Hydrol., vol. 533, pp. 141–151, 2016.
[4] M. Jajarmizadeh, S. Harun, and M. Salarpour, “An assessment on base and peak flows using a physically-based model,” Res. J. Environ. Earth Sci., vol. 5, no. 2, pp. 49–57, 2013.
[5] D. N. Moriasi, J. L. Steiner, and J. G. Arnold, “Sediment measurement and transport modeling: Impact of riparian and filter strip buffers,” J. Environ. Qual., vol. 40, no. 3, pp. 807–814, 2011.
[6] A. Singh and A. K. Gosain, “Climate-change impact assessment using GIS-based hydrological modelling,” Water Int., vol. 36, no. 3, pp. 386–397, 2011.
[7] L. Boithias, S. Sauvage, L. Taghavi, G. Merlina, J.-L. Probst, and J. M. S. Pérez, “Occurrence of metolachlor and trifluralin losses in the Save river agricultural catchment during floods,” J. Hazard. Mater. vol. 196, pp. 210–219, 2011.
[8] C. Oeurng, S. Sauvage, and J.-M. Sánchez-Pérez, “Temporal variability of nitrate transport through hydrological response during flood events within a large agricultural catchment in south-west France,” Sci. Total Environ., vol. 409, no. 1, pp. 140–149, 2010.
[9] J. G. Arnold et al., “SWAT: model use, calibration, and validation,” Trans. ASABE, vol. 55, no. 4, pp. 1491–1508, 2012.
[10] P. W. Gassman, A. M. Sadeghi, and R. Srinivasan, “Applications of the SWAT model special section: overview and insights,” J. Environ. Qual., vol. 43, no. 1, pp. 1–8, 2014.
[11] M. K. Shrestha, F. Recknagel, J. Frizenschaf, and W. Meyer, “Assessing SWAT models based on single and multi-site calibration for the simulation of flow and nutrient loads in the semi-arid Onkaparinga catchment in South Australia,” Agric. Water Manag., vol. 175, pp. 61–71, 2016.
[12] V. Shivhare, M. K. Goel, and C. K. Singh, “Simulation of Surface Runoff for Upper Tapi Subcatchment Area (Burhanpur Watershed) Using Swat,” Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci., vol. 40, no. 8, p. 391, 2014.
[13] T. J. Baker and S. N. Miller, “Using the soil and water assessment tool (SWAT) to assess land use impact on water resources in an east African watershed,” J. Hydrol., vol. 486, pp. 100–111, 2013.
[14] F. Bouraoui, S. Benabdallah, A. Jrad, and G. Bidoglio, “Application of the SWAT model on the Medjerda river basin (Tunisia),” Phys. Chem. Earth, Parts A/B/C, vol. 30, no. 8–10, pp. 497–507, 2005.
[15] H. Sellami, S. Benabdallah, I. La Jeunesse, and M. Vanclooster, “Quantifying hydrological responses of small Mediterranean catchments under climate change projections,” Sci. Total Environ., vol. 543, pp. 924–936, 2016.
[16] E. Molina-Navarro, D. Trolle, S. Martínez-Pérez, A. Sastre-Merlín, and E. Jeppesen, “Hydrological and water quality impact assessment of a Mediterranean limno-reservoir under climate change and land use management scenarios,” J. Hydrol., vol. 509, pp. 354–366, 2014.
[17] G. Wang and J. Xia, “Improvement of SWAT2000 modelling to assess the impact of dams and sluices on streamflow in the Huai River basin of China,” Hydrol. Process. An Int. J., vol. 24, no. 11, pp. 1455–1471, 2010.
[18] S. M. Ghoraba, “Hydrological modeling of the Simly Dam watershed (Pakistan) using GIS and SWAT model,” Alexandria Eng. J., vol. 54, no. 3, pp. 583–594, 2015.
[19] K. C. Abbaspour, E. Rouholahnejad, S. Vaghefi, R. Srinivasan, H. Yang, and B. Kløve, “A continental-scale hydrology and water quality model for Europe: calibration and uncertainty of a high-resolution large-scale SWAT model,” J. Hydrol., vol. 524, pp. 733–752, 2015.
[20] T. S. Khayyun, I. A. Alwan, and A. M. Hayder, “Hydrological model for Hemren dam reservoir catchment area at the middle River Diyala reach in Iraq using ArcSWAT model,” Appl. Water Sci., vol. 9, no. 5, p. 133, 2019.
[21] J. G. Arnold, R. Srinivasan, R. S. Muttiah, and J. R. Williams, “Large area hydrologic modeling and assessment part I: model development 1,” JAWRA J. Am. Water Resour. Assoc., vol. 34, no. 1, pp. 73–89, 1998.
[22] R. A. Leonard, W. G. Knisel, and D. A. Still, “GLEAMS: Groundwater loading effects of agricultural management systems,” Trans. Asae, vol. 30, no. 5, pp. 1403–1418, 1987.
[23] M. Jajarmizadeh, L. M. Sidek, S. Harun, and M. Salarpour, “Optimal calibration and uncertainty analysis of SWAT for an arid climate,” Air, Soil Water Res., vol. 10, p. 1178622117731792, 2017.
[24] S. L. Neitsch, J. G. Arnold, J. R. Kiniry, and J. R. Williams, “Soil and water assessment tool theoretical documentation version 2009,” Texas Water Resources Institute, 2011.
[25] J. G. Arnold, J. R. Kiniry, R. Srinivasan, J. R. Williams, E. B. Haney, and S. L. Neitsch, “SWAT 2012 input/output documentation,” Texas Water Resources Institute, 2013.
[26] P. W. Gassman, M. R. Reyes, C. H. Green, and J. G. Arnold, “The soil and water assessment tool: historical development, applications, and future research directions,” Trans. ASABE, vol. 50, no. 4, pp. 1211–1250, 2007.
[27] E. B. Daniel, J. V Camp, E. J. LeBoeuf, J. R. Penrod, J. P. Dobbins, and M. D. Abkowitz, “Watershed modeling and its applications: a state-of-the-art review,” Open Hydrol. J., vol. 5, no. 1, 2011.
[28] K. R. Douglas-Mankin, R. Srinivasan, and J. G. Arnold, “Soil and Water Assessment Tool (SWAT) model: Current developments and applications,” Trans. ASABE, vol. 53, no. 5, pp. 1423–1431, 2010.
[29] K. C. Abbaspour, M. T. Van Genuchten, R. Schulin, and E. Schläppi, “A sequential uncertainty domain inverse procedure for estimating subsurface flow and transport parameters,” Water Resour. Res., vol. 33, no. 8, pp. 1879–1892, 1997.
[30] A. S. Mhaina, “Modeling suspended sediment load using SWAT model in data scarce area-Iraq (Al-Adhaim Watershed as a case study).” UNIVERSITY OF TECHNOLOGY, 2017.
[31] Global weather, NCEP Climate Forecast System Reanalysis (CFRS).
[32] D. N. Moriasi, J. G. Arnold, M. W. Van Liew, R. L. Bingner, R. D. Harmel, and T. L. Veith, “Model evaluation guidelines for systematic quantification of accuracy in watershed simulations,” Trans. ASABE, vol. 50, no. 3, pp. 885–900, 2007.
[33] K. C. Abbaspour, C. A. Johnson, and M. T. Van Genuchten, “Estimating uncertain flow and transport parameters using a sequential uncertainty fitting procedure,” Vadose Zo. J., vol. 3, no. 4, pp. 1340–1352, 2004.
[34] C. K. Abbaspour, “SWAT Calibrating and Uncertainty Programs,” A User Manual. Eawag Zurich, Switz., 2015.
[35] Y. Duan et al., “Inclusion of Modified Snow Melting and Flood Processes in the SWAT Model,” Water, vol. 10, no. 12, p. 1715, 2018.
)
