Document Type : Research Paper

Authors

1 Electromechanical Engineering Dept., University of Technology-Iraq, Alsina’a Street, P.O. Box 10066, Baghdad, Iraq.

2 Mechanical Engineering, University of Technology, Johor, Malaysia.

Abstract

Biodegradable (Vegetable) fluids are considered as environmentally friendly fluids and possess an abundant benefit, they are wildly available by means of renewable sources compared to different kinds of mineral-oil.  Given the occurrence of environmental pollution and health problems from mineral oils.  This paper investigates the effect of utilizing the corn oil for the cooling performing features of distribution electric transformer, and making a comparison with the cooling performance of the electric transformer whith cooling by the commercial mineral fluid. This investigation is done by using the four- ball machine and electric transformers. Each experiment that was executed complies with ASTM D4172-B under different electrical loads (200-1600W). Depending on the outcomes of the four-ball machine and electric transformer, it has been noticed that the corn oil has the adequate cooling behavior compared to the commercial cooling fluid. It maintains the insulation housing between the coils, and maintains the coils when overloaded at peak time.

Graphical Abstract

Highlights

  • Study the thermal and tribological behaviour of the corn oil.
  • The bio-lubrication obtained gives a decrease in the value of the Wear diameter.
  • Laboratory prototype of electric transformer used for verifying the performance.

Keywords

Main Subjects

[1] S . K . Sahdev , Electrical Machines, Cambridge University Press, Nov 24, 2017 .
[2] B . L . Therja  ,  A . K . Therja  A Text Book in Electrical Technology,2, S. Chand, 2005.
[3] [ M . A .  Delgado ,  L . A . Quinchia  , and   C .  Galegos Viscosity modification of different   vegetable oil with EVA copolymer for lubricant applicants , Industrial Crops and Products, 32,1,2010,607–612.
[4] M. Nosonovsky, Oil as a lubricant in the ancient Middle East,   Tribology Online,  2 ,  2 , 2007, 44–49 .   [Online ] at Available :: https://www.jstage.jst.go.jp/article/trol/2/2/2_2_44/_article/-char/ja/ Online ISSN : 1881-2198 .ISSN-L : 1881-218X  ,  https://doi.org/10.2474/trol.2.44
[5] M . Hassan ,  F . N . Ani , and  S .  Syahrullail , The tribological characteristics of rbd palm olein with jatropha oil blend using four-ball tribotester with different normal loads , Applied Mechanics and Materials, 819, 2016,  499-503.    .  https://doi.org/10.4028/www.scientific.net/AMM.819.499
[6] I . Golshokouh  , S .  Syahrullail  , F  .  N .  Ani  , and  H . H . Masjuki.  Investigation of Palm Fatty Acid Distillate Oil as an Alternative to Petrochemical Based Lubricant  .MPOB Journal, 7 , 1 , 2013,72-80.
[7] M . H .  Jabal ,  A . R . Abdulmunem , and  H .  S . Abd  , Experimental investigation of tribological characteristics and emissions with nonedible sunflower oil as a bio lubricant   , Journal of the Air & Waste Management Association,  69  ,1 2019,109-118 . DOI: 10.1080/10962247.2018.1523070.
[8] H . I . Ahmed  , X . M . Hassan , and  C . A . Abdul, Performance changes for window type air-conditioner unit chemically treated to work in an industrial petrochemical environment , Engineering & Technology Journal,  29 , 2011, 430-447.
[9] W . B . W . Nik  ,  F . N . Ani , and  H . H . Masjuki  , Thermal stability evaluation of palm oil as energy transport media  , Energy Conservation and Management,  46 ,  13-14 , 2005,  2198-2215.
 https://www.sciencedirect.com/science/article/abs/pii/S0196890404002456
[10] S . Syahrullail  ,  K . Nakanishi  , and  S  .  Kamitani  .  Investigation of the effects of frictional constraint with application of palm olein oil lubricant and paraffin mineral oil lubricant on plastic deformation by plane strain extrusion , Journal of Japanese Society of  Tribologists , 50,12,2005,877–885. 
[11] C . T . Ing ,  A. K. M. Rafiq ,  Y. Azli , and  S . Syahrullail  ,The effect of temperature on the tribological behavior of RBD palm stearin, Tribology Transactions, 55 , 5 , 2012, 539–548.. https://doi.org/10.1080/10402004.2012.680176 
[12] M . Hassan ,  S .  Syahrullail  , and  F . N . Ani .  The tribological characteristics of the cactus and mineral oil blends using four-ball tribotester ,  . Jurnal Teknologi, Progress in Energy and Thermofluids Sciences , 78 , 9-2 , 2016, 33-38 . doi: https://doi.org/10.11113/jt.v78.9652
[13] M . H . Jabal ,  F . N . Ani , and  S . Syahrullail .  The Tribological Characteristic of the Blends of RBD Palm Olein with Mineral Oil using Four-ball Tribotester, Jurnal Teknologi, 69 , 2014,11-14.
doi: https://doi.org/10.11113/jt.v69.3232
[14] M . A .  Maleque ,   H . H . Masjuki , and  A.S.M.A. Haseeb,  Effect of mechanical factors on tribological properties 4 of palm oil methyl ester blended lubricant  .Wear, 239 , 1 ,2000,117–125.  . doi.org/10.1016/S0043-1648(00)00319-7
[15] M . H . Jabal ,  M . Z . Khalefa  ,   Tribological Characteristics Evaluation of Mustard Oil Blends    . Journal of Engineering,. 24 , 3 , 2018,1-12. doi: 10.31026/j.eng.2018.03.01.
[16] M  .  H . Jabal ,  F. N .  Ani  , and  S . S . Syahrullail ,    Tribological features of refined, bleached and deodourised (RBD) palm olein blends with mineral oil . Jurnal Mekanikal,38,2,2015 .
https://jurnalmekanikal.utm.my/index.php/jurnalmekanikal/article/view/21.
[17] A . R . Abdulmunem  ,  M . H . Jabal ,  P. M . Samin ,  H . A . Rahman  , and  H. A. Hussien ,    Analysis of Energy and Exergy for the Flat Plate Solar Air Collector with Longitudinal Fins Embedded in Paraffin Wax Located in Baghdad Center   .37 , 4  , 219,1180-1186. Journal homepage: http://iieta. org/journals/ijht,
[18] H . S .  Abd ,   A . R . Abdulmunem  ,  M . H . Jabal ,  P. M . Samin  , and  H. A. Rahman  .   Working Features Evaluation of the Diesel Engine Lubricated with Blends of Renewable Corn Oil and Carbon Nanotubes   J. Mech. Eng. Res. Develop , 43  , 2  , 2020,384-395. 
[19] M . H . Jabal ,   M . Z . Khlefia ,   I . S .  Ahmed  ,and  H . D .  Salman ,      Performance Features Of The Sunflower Seeds Oil As A Hydraulic Bio Fluid Under Various Normal Loads   . Journal Teknologi, 82 . 2 ,  , 2020 .
[20] M . H . Jabal ,  H . S. Abd ,  A . A . Gaddoa , I . F. Kadhim , S . Samion , A . S . Shajar , and  A . A. Hardan  ,    Palm Olein with Jatropha Curcas Oil Blend as a Renewable Bio-Fluid,  IOP Conference Series: Materials Science and Engineering ,  765,. 1, 2020,p. 012025.
[21] A . R. . Abdulmunem ,  M . H .  Jabal , and  H . S . Abd ,  IC-Engine performance using MWCNT Dispersed in non-edible sunflower oil as Bio lubricant: Experimental Investigation  . International Journal of mechanical  Engineering and Technology (IJMET)  . 9,  13, 2018,1071–1082. [online] at Available : http://www.iae ISSN Print: 0976-6340 and ISSN
[22] M . H. Jabal ,  M . Z . Khlefia , and  A. R. Abdulmunem   Tribological Performance Of Mustard Seeds Oil Under Different Loads Using Pin-On-Disk Tribotester  . the iraqi journal for mechanical and materials engineering , 18,  4 , 2018,527-537.   
[23] M. Hassan ,  F.N. Ani  , and  S. Syahrullail  .     Tribological Performance of Refined, Bleached and Deodorised Palm Olein Blends Bio-lubricants  . Journal of Oil Palm Research , 28 ,  4 ,2016, 510-519 .
[24] H . H . Masjuki ,  M.A. Maleque ,   Investigation of the anti-wear characteristics of palm oil methyl ester (POME) contaminated with lube oil using a Four-ball machine of IP239 standard . Wear, , 206  ,  1-2 ,  1997,179-186.  
[25] F. A. Fattah ,  M. M. Ariff, J. M  .Hassan  , and A. F. Nasir .    The Tribological Characteristics of Rubber Seed Oil With Mineral Oil Blends .Malaysian Journal of Industrial Technology (MJIT).  2 , 2  ,  2017,2462-2540   .
[26] M . Hassan , F. N. Ani  and  S. Syahrullail.  Tribological Features of Refined, Deodorized, and Bleached Palm Olein with Mineral Oil Blend .Tribology Transactions,  59 ,  4 , 2016, 671-678. https://doi.org/10.1080/10402004.2015.1107928 .
[27] A. Hussain ,  S. Mehdi , A. Ali , M. Adeel , M . Jabal ,  and  F. Ani ,    Investigation of tribological characteristics of castor oil with mineral oil blends . Journal Of Engineering And Applied Sciences, ,  37 , 1 , 30 June , 2018 .  https:// doi.org/https: //doi.org /10.25211 /jeas.v37i1.2688.
[28] M. H. Jabal, E. O. Hassoun, A. R. Abdulmunem, and  F. N. Ani . Experimental Investigation Of The Neat Rubber Seed Oil As A Hydraulic Fluid Using Four-Ball Tribotester .Journal of Engineering Science and Technology  , 14 , 5 ,  2019,2670 – 2680.
[29] Electrical Insulating Oil Test Lab ,  https://www.nepco.com.jo/intel/oil_lab_ar.aspx
[30] J. Dofan,  Study On Thermal Model For Calculating Transformer Hot Spot Temperature, Faculty Of Electrical & Electronic Engineering, University Tun Hussein Onn Malaysia (UTHM) . PhD diss , Thesis, May, 2011.
[31] L . L . Grigsby, The electric power engineering handbook  Power Systems, Taylor &Francis group , Third Edition , London, New York , 2012. 
[32] R . M . Del Vecchio , B .  Poulin , P . T.  Feghali  ,  D . M . Shah, and  R .  Ahuja .  Transformer design principles, Taylor &Francis group , third edition , London , new York , 2017. https://doi.org/10.1201/9781315155920
[33] The State Company for Electrical and Electronic Industries, AL-Wazyria, Baghdad, 2021.
[34] M . H. Jabal,  A. Abdulmunem , and  H . Abd, As a potential hydraulic fluid: corn oil behavior characteristics examination, Journal of Thermal Engineering, Special Issue 13: 2nd International Conference (ICRESE -2020), India. 7, 2 ,  2021, 215-221. doi: 10.18186/thermal.871628,