[1] O. A. Towoju, A. Dare, Modelling of Reduced N-Heptane Combustion in Compression Ignition Engine, Int. J. Eng. Technol. Manag. Appl. Sci., 5 (2016) 1-8.
[2] J. Agboola, B. T. Lebele-Alawa, B. Nkoi. A Study Of Combustion Temperature Distribution in The Cylinder of Compression Ignition Engine, Am. J. Eng. Res., 7 (2018) 304-312.
[3] S. Konda, P. S. Goud, M. Narsimha, V. R. Goud, T. C. Shekar, Effect Of High Engine Temperature On Performance And Characteristics Of IC Engine, Int. J. Adv. Res. Innov. Ideas Educ., 2 (2017) 125-131.
[4] A. A. Pauzi, M. H. Abdul Ghaffar, S.Y. Chang, G. P. Ng, S. Husin, A study on tensile deformation at room temperature and 650ºC in the directional solidified Ni-base superalloy GTD-111, J. Phys. Conf. Ser., 914 (2017). https://doi.org/10.1088/1742-6596/914/1/012021
[5] R. Wang, B. Zhang, D. Hu, K. Jiang, H. Liu, J. Mao, et al., Thermomechanical fatigue experiment and failure analysis on a nickel-based superalloy turbine blade, Eng. Fail. Anal., 102 (2019) 35–45. https://doi.org/10.1016/j.engfailanal.2l019.04.023
[6] S. Rani S, A.K. Agrawal, V. Rastogi. Failure analysis of a first stage IN738 gas turbine blade tip cracking in a thermal power plant. Case Stud. Eng. Fail. Anal., 8 (2017) 1–10. https://doi.org/10.1016/j.csefa.2016.11.002
[7] P. Puspitasari, A. Andoko, P. Kurniawan. Failure analysis of a gas turbine blade: A review. IOP Conf. Ser.: Mater. Sci. Eng., 1034 (2021) 1-9. https://doi.org/10.1088/1757-899X/1034/1/012156
[8] S. Basu, A. K. Debnath. Chapter 1 – Introduction. Editor(s): S. Basu, A. J. Debnath, Power Plant and Instrumentation and Control Handbook (Second Edition), Academic Press, 2019.
[9] A. D. Rao. 2 – Gas-fired combined-cycle power plant design and technology. Editor: Dermot Roddy, In Woodhead Publishing Series in Energy, Advanced Power Plant Materials, Design and Technology, 2010.
[10] F. S. Moghanlou, M. Vajdi, A. Motallebzadeh, J. Sha, M. Shokouhimehr, M. S. Asi. Numerical analyses of heat transfer and thermal stress in ZrB2 gas turbine stator blade, Ceram. Int., 45 (2019) 17742-17750. https://doi.org/10.1016/j.ceramint.2019.05.344
[11] A. M. Mirhosseini, S. A. Nazari, A. M. Pour, S. E. Haghighi, M. Zareh. Failure analysis of first stage nozzle in a heavy-duty gas turbine, Eng. Fail. Anal., 109 (2020) 104303. https://doi.org/10.1016/j.engfailanal.2019.104303
[12] S. Qu, C. M. Fu, C. Dong, J. F. Tian, Z. F. Zhang, Failure Analysis of The 1st Stage Blades in Gas Turbine Engine, Eng. Fail. Anal., 32 (2013) 292–303. https://doi.org/10.1016/j.engfailanal.2013.03.017
[13] J. A. Segura, L. Castro, I. Rosales, J. A. Rodriguez, G. Urquiza, J. M. Rodriguez. Diagnostic and failure analysis in blades of a 300 MW steam turbine, Eng. Fail. Anal., 82 (2017) 631–641. https://doi.org/10.1016/j.engfailanal.2017.04.039
[14] H. Kazempour-Liasi, A. Shafiei, Z. Lalegani. Failure Analysis of First and Second Stage Gas Turbine Blades, J. Fail. Anal. Preven., 19 (2019) 1673–1682. https://doi.org/10.1007/s11668-019-00764-1
[15] H. Moshayedi, M. Moattari, K. Azizpour. Failure analysis of outer casing bolts of a 325 MW steam turbine. Eng. Fail. Anal., 97 (2019) 189–200. https://doi.org/10.1016/j.engfailanal.2019.01.044
[16] R. K. Mishra, N. Vaishakhi, R. R. Bhatt. Thermo-mechanical Fatigue Failure of a Low-Pressure Turbine Blade in a Turbofan Engine, J. Fail. Anal. Preven., 18 (2018) 233–240. https://doi.org/10.1007/s11668-018-0408-6
[17] K. Vaferi, S. Nekahi, M. Vajdi, F. S. Moghanlou, M. Shokouhimehr, A. Motallebzadeh, et al., Heat transfer, thermal stress and failure analyses in a TiB2 gas turbine stator blade. Ceram. Int., 45 (2019) 19331-19339. https://doi.org/10.1016/j.ceramint.2019.06.184
[18] O. A. Towoju, F. A. Ishola. Numerical investigation of the variation of a uniformly dimensioned cast iron property using cooling channels, Mater. Today. Proc., 46P1 (2021) 279-284. https://doi.org/10.1016/j.matpr.2020.08.013
[19] A. Abid, M. T. Sarowar. Heat transfer, thermal stress and failure inspection of a Gas turbine compressor stator blade made of five different conventional superalloys and ultra-high-temperature ceramic material: A direct numerical investigation. J. Fail. Anal. Preven., 22 (2022) 878-898. https://doi.org/10.1007/s11668-022-01413-w
[20] M.T Schobeiri, Impact of turbine blade stagger angle adjustment on the efficiency and performance of gas turbine during off-design and dynamic operation, ASME Turbo Expo, 2018. https://doi.org/10.1115/GT2018-75968
[21] P. Li, Z. Han, X. Jia, Z. Mei, X. Han. Analysis of the effects of blade installation angle and blade number on radial-inflow turbine stator performance, Energies, 11 (2018) 1-15. https://doi.org/10.3390/en11092258