Processing of Butter From Anhydrous Milk Fat and Reconstituted Dried Skim Milk
Processing of Butter From Anhydrous Milk Fat and Reconstituted Dried Skim Milk
Volume 28, Issue 14 , July 2010, Page 723-731

https://doi.org/10.30684/etj.28.14.17

Abstract
  Butter was produced from a mixture of anhydrous milk fat and reconstituted dried skim milk in a ratio of 1:3 and different percentages (0-5%) added to starter mixture. Electrical butter ...  Read More ...
The Effect of Carbon Particles on Styropore Solvent by Benzene
The Effect of Carbon Particles on Styropore Solvent by Benzene
Volume 28, Issue 14 , July 2010, Page 732-742

https://doi.org/10.30684/etj.28.14.18

Abstract
  In this research is improvement of physical and mechanical properties bysolvent the styropore with labaritory benzene (C6H6) and then mixing withdifferent weighted ratio of carbon particles ...  Read More ...
Establishing Total Quality Management Application System For School Building Projects in Iraq
Establishing Total Quality Management Application System For School Building Projects in Iraq
Volume 28, Issue 14 , July 2010, Page 743-760

https://doi.org/10.30684/etj.28.14.19

Abstract
  ISO 9001 certificate becomes an important issue in the resent time specially for global objectives companies that have an extended activities over different countries. ISO certificate ...  Read More ...
Tensile Strength of Lime Stabilized Gypseous Soil
Tensile Strength of Lime Stabilized Gypseous Soil
Volume 28, Issue 14 , July 2010, Page 761-772

https://doi.org/10.30684/etj.28.14.20

Abstract
  This work aims to study the properties of tensile strength of lime stabilized gypseous soil considering to the following variables: curing conditions which include the temperature and ...  Read More ...
Effect of Alumina-Doping on Structural and Optical Properties of Zno Thin Films by Pulsed Laser Deposition
Effect of Alumina-Doping on Structural and Optical Properties of Zno Thin Films by Pulsed Laser Deposition

Ali A. Yousif; Nadir F. Habubi; Adawiya J.Haidar

Volume 28, Issue 14 , July 2010, Page 4677-4686

https://doi.org/10.30684/etj.28.14.1

Abstract
  Alumina-doped Zinc Oxide (AZO) thin films on quarts glass substrateshave been deposited by pulsed laser deposition technique using a pulsed Nd-YAG laser with the wavelength of (ë= ...  Read More ...
Convergence of The Discrete Classical Optimal Control Problem To The Continuous Classical Optimal Control Problem Including A Nonlinear Hyperbolic P.D. Equation
Convergence of The Discrete Classical Optimal Control Problem To The Continuous Classical Optimal Control Problem Including A Nonlinear Hyperbolic P.D. Equation

Jamil A. Ali Al-Hawasy

Volume 28, Issue 14 , July 2010, Page 4687-4702

https://doi.org/10.30684/etj.28.14.2

Abstract
  Our focus in this paper is to study the behaviour in the limit of the discrete classical optimal control problem including partial differential equations of nonlinear hyperbolic type. ...  Read More ...
Nonlinear Analysis of Thermoviscoelasticity of Laminated Composites
Nonlinear Analysis of Thermoviscoelasticity of Laminated Composites

Muhsin J.Jweeg; Adnan M. Al-Sultany; Raed Naeem Hwyyin

Volume 28, Issue 14 , July 2010, Page 4703-4721

https://doi.org/10.30684/etj.28.14.3

Abstract
  The nonlinear thermoviscoelastic behavior of composite thin plates isinvestigated. An experimental program covers an achievement of creep tests under different temperatures, dimensions ...  Read More ...
Approximated Solution of Higher–Order Linear Fredholm Integro–Differential Equations by Computing of Singular Value Decomposition (SVD)
Approximated Solution of Higher–Order Linear Fredholm Integro–Differential Equations by Computing of Singular Value Decomposition (SVD)

Amaal A. Mohammed; Sudad K. Ibraheem

Volume 28, Issue 14 , July 2010, Page 4722-4729

https://doi.org/10.30684/etj.28.14.4

Abstract
  Our main concern here is to give an approximate scheme to solve a linearFredholm integro–differential equations of higher–order (LFIDE) using expansion method with the expansion ...  Read More ...
Design and Implementation of Adaptive Modulation Modem Based on Software Defined Radio(SDR) for WiMAX System
Design and Implementation of Adaptive Modulation Modem Based on Software Defined Radio(SDR) for WiMAX System

H. T. Ziboon; Zeinah Tariq Naif

Volume 28, Issue 14 , July 2010, Page 4730-4749

https://doi.org/10.30684/etj.28.14.5

Abstract
  This paper presents design and implementation of adaptivemodulation modem for WiMAX system. (BPSK, QPSK, 8QAM, 16QAM,32QAM and 64QAM) are used in this work. Software Defined Radio(SDR)is ...  Read More ...
Evaluation of Transverse Construction Joints of Reinforced Concrete Beams
Evaluation of Transverse Construction Joints of Reinforced Concrete Beams

Qais Abdul-Majeed

Volume 28, Issue 14 , July 2010, Page 4750-4773

https://doi.org/10.30684/etj.28.14.6

Abstract
  Construction joints are stopping places in the process of placing concrete, and they are required because in many structures it is impractical to place concrete in one continuous operation. ...  Read More ...
Performance Characteristic of Distributed Erbium Doped Fiber Amplifier(D-EDFA)
Performance Characteristic of Distributed Erbium Doped Fiber Amplifier(D-EDFA)

Sharif M. Rashid; Banaz Omer Rasheed

Volume 28, Issue 14 , July 2010, Page 4774-4788

https://doi.org/10.30684/etj.28.14.7

Abstract
  D-EDFA have their signal gain distributed over long fiber lengths. This paper deals with gain and noise figure characteristics at 150dB/km Rayleigh constant of a forward, and bidirectional ...  Read More ...
Developing Multistage Heuristic Algorithm To Minimize Idle Time And Makespan In Job Shop Scheduling
Developing Multistage Heuristic Algorithm To Minimize Idle Time And Makespan In Job Shop Scheduling

Mahmoud Abbas Mahmoud

Volume 28, Issue 14 , July 2010, Page 4789-4805

https://doi.org/10.30684/etj.28.14.8

Abstract
  The behavior and performance of job shops have been the focus andattention in both operations research and operations management literature. Job shop scheduling has received this large ...  Read More ...
Two Layer Optimum Design of Low Dispersion Optical Fiber (1500-1600 nm) Using Evolutionary Synthesis.
Two Layer Optimum Design of Low Dispersion Optical Fiber (1500-1600 nm) Using Evolutionary Synthesis.

Alaa Hussain; Ali H. Al-Hamdani; Muhammed A. Hussain

Volume 28, Issue 14 , July 2010, Page 4806-4815

https://doi.org/10.30684/etj.28.14.9

Abstract
  Amathematical procedure for optimization depends on the evolutionaryalgorithm has been proposed to estimate the optimum design of single mode optical fiber upon finding the core and ...  Read More ...
Power Series Method For Solving Nonlinear Volterra Integro-Differential Equations of The Second Kind
Power Series Method For Solving Nonlinear Volterra Integro-Differential Equations of The Second Kind

Hanan Mahmood Hasson

Volume 28, Issue 14 , July 2010, Page 4816-4824

https://doi.org/10.30684/etj.28.14.10

Abstract
  In this work, we present the power series method for solving special typesof the first order nonlinear Volterra integro-differential equations of the second kind. To show the efficiency ...  Read More ...
The Study of Immunological And Cytogenetic Effects of Polyvinyl Alcohol
The Study of Immunological And Cytogenetic Effects of Polyvinyl Alcohol

Falak O. Abas; Azhar M. Halim

Volume 28, Issue 14 , July 2010, Page 4825-4832

https://doi.org/10.30684/etj.28.14.11

Abstract
  This study has been designed to investigate the toxicity effects ofpolyvinyl alcohol at different concentrations on peripheral blood lymphocytes by measuring each of blastogenic index, ...  Read More ...
The Dependence of Organic Bulk Heterojunction Solar Cells Efficiency on The Charge Carrier Mobility
The Dependence of Organic Bulk Heterojunction Solar Cells Efficiency on The Charge Carrier Mobility

Wisam A. Latif; Dayah N. Raouf

Volume 28, Issue 14 , July 2010, Page 4833-4842

https://doi.org/10.30684/etj.28.14.12

Abstract
  The power conversion efficiency of organic solar cells based on donoracceptor blends is governed by two competing processes, extraction and recombination of charge carriers. Both processes ...  Read More ...
The Design of a Tuned Mass Damper as a Vibration Absorber
The Design of a Tuned Mass Damper as a Vibration Absorber

Taghreed M. Mohammad Ridha

Volume 28, Issue 14 , July 2010, Page 4843-4852

https://doi.org/10.30684/etj.28.14.13

Abstract
  The protection of civil structures, including their material contents andhuman occupants, is without doubt a world-wide priority of most serious currentresearch. Such protection may ...  Read More ...
Factors Affecting Compatibility between (S.B.R) Polymer Repair Materials and Concrete Substrate
Factors Affecting Compatibility between (S.B.R) Polymer Repair Materials and Concrete Substrate

Haider A. Abdul-Hameed; Aseel S. Mansi; Maan S. Hassan

Volume 28, Issue 14 , July 2010, Page 4853-4865

https://doi.org/10.30684/etj.28.14.14

Abstract
  In this study, the compatibility of polymer modified repair mortar andsubstrate concrete was investigated in three stages. First stage includes studying the individual properties of ...  Read More ...
Generalized Spline Approximation Method for Solving Ordinary and Partial Differential Equations
Generalized Spline Approximation Method for Solving Ordinary and Partial Differential Equations

Nabaa N. Hasan; Suha N. Al-Rawi; Fadhel S.Fadhel

Volume 28, Issue 14 , July 2010, Page 4866-4873

https://doi.org/10.30684/etj.28.14.15

Abstract
  The main theme of this paper is to approximate the solution of ordinarydifferential equations by using basis of generalized spline functions then using tensor product analysis to generalize ...  Read More ...
Dynamic Failure Mode And Impact Energy Absorption of Filament-Wound Square Cross-Section Composite Tubes
Dynamic Failure Mode And Impact Energy Absorption of Filament-Wound Square Cross-Section Composite Tubes

Mohammad Abdul Hassan Whaib; Hussain J. Al-Alkawi

Volume 28, Issue 14 , July 2010, Page 4874-4889

https://doi.org/10.30684/etj.28.14.16

Abstract
  In the present work simulation of impact response using LS-DYNA explicitfinite element code is described to investigate the crash behavior and energy absorption characteristics of square ...  Read More ...