Diagnosis of The Knowledge Authorities of The Religious Discourse in Architectural Academic Research
Diagnosis of The Knowledge Authorities of The Religious Discourse in Architectural Academic Research

Nawfal Josef Rizco

Volume 33, 7A , July 2015, Page 56-85

https://doi.org/10.30684/etj.33.7A.14

Abstract
  The Academic Theoretical Frameworks and through their rhetoric and implications of their intellectual base are considered an important foundation to build upon them in advancing the ...  Read More ...
Hydraulic Characteristics of Flow Over Triangular Broad Crested Weirs
Hydraulic Characteristics of Flow Over Triangular Broad Crested Weirs

Raad Hoobi Irzooki; Mohammad Faiq Yass

Volume 33, 7A , July 2015, Page 86-96

https://doi.org/10.30684/etj.33.7A.15

Abstract
  In the present work, the hydraulic characteristics of flow over triangular broad crested weirs with triangular front or back face have been experimentally studied. The main objective ...  Read More ...
The Catalyst Historic Building in Urban Development
The Catalyst Historic Building in Urban Development

Teba Abdullah Mohammed; Wahda Shuker Mahmoud

Volume 33, 7A , July 2015, Page 97-116

https://doi.org/10.30684/etj.33.7A.16

Abstract
  The sustainability of cultural heritage assets – especially historic buildings - becomes a vital part which can be utilized in development plans. Locally, these buildings suffer ...  Read More ...
Effect of Particle Size and Shape on Properties of Copper – Graphite Composites
Effect of Particle Size and Shape on Properties of Copper – Graphite Composites

Abbas Abdulkareem Hussein; Raed N. Razooki; Farouk M. Mahdi

Volume 33, 7A , July 2015, Page 117-132

https://doi.org/10.30684/etj.33.7A.17

Abstract
  The present work aims to study the effect of particles shape and size of copper powder on physical, mechanical properties and wear resistance of copper-13vol%graphite composites prepared ...  Read More ...
Experimental Study of the Effect of VentilatedCavity Wall on Building Cooling Load
Experimental Study of the Effect of VentilatedCavity Wall on Building Cooling Load

Qussai J. Abdul Ghafour; Bashar Kamil Mahmoud

Volume 33, 7A , July 2015, Page 133-147

https://doi.org/10.30684/etj.33.7A.18

Abstract
  The study, which was made during August showed through calculations, that the use of ventilated cavity wall by air with temperature equal to the temperature of the space (about 25.5oC) ...  Read More ...
Experimental Study of Steady-State Tube Expansion by using Conical Mandrel
Experimental Study of Steady-State Tube Expansion by using Conical Mandrel

Tahseen Taha Othman; Hazim Khalil Khalaf; Jalal Khorshed Alyan

Volume 33, 7A , July 2015, Page 148-166

https://doi.org/10.30684/etj.33.7A.19

Abstract
  An Experimental study Conducted for the continuous expansion process of the brass (70/30) tubes by pushing a conical rigid mandrel inside the tube mechanically. This study included ...  Read More ...
Artificial Lighting Effect in the Nightscape Elements Figuration of the Landscape
Artificial Lighting Effect in the Nightscape Elements Figuration of the Landscape

Rawaa Fawzi Abbawi

Volume 33, 7A , July 2015, Page 167-183

https://doi.org/10.30684/etj.33.7A.20

Abstract
  With the accelerated pace of urban life and increasing of working hours during the day so the time for most people to enjoy and do their social activities entertainment became at evening ...  Read More ...
Behavior of Reinforced RPC Beams Strengthened by External CFRP in Flexure
Behavior of Reinforced RPC Beams Strengthened by External CFRP in Flexure

Kaiss F. Sarsam; Raid I. Khalel; Falah Jarass Aied

Volume 33, 7A , July 2015, Page 1537-1554

https://doi.org/10.30684/etj.33.7A.1

Abstract
  This study is an attempt to provide experimental test data for reactive powder concrete (RPC) beams strengthened by externally bonded carbon fiber reinforced polymer (CFRP) in flexure. ...  Read More ...
Implementation and Performance Evaluation of WSN for Energy Monitoring Application
Implementation and Performance Evaluation of WSN for Energy Monitoring Application

Haider A. H. Alobaidy; Hikmat N. Abdullah; Tariq M. Salman

Volume 33, 7A , July 2015, Page 1555-1568

https://doi.org/10.30684/etj.33.7A.2

Abstract
  The aim of this paper is to develop a wireless sensor network to measure and analyze energy consumption in buildings and to investigate the bounds of coverage in different building ...  Read More ...
Determining the Effect of Process Parameters on Surface Roughness in two Point Incremental Sheet Metal Forming Process using the Taguchi Method
Determining the Effect of Process Parameters on Surface Roughness in two Point Incremental Sheet Metal Forming Process using the Taguchi Method

Harith Yarub Maan

Volume 33, 7A , July 2015, Page 1569-1582

https://doi.org/10.30684/etj.33.7A.3

Abstract
  The main aim of this study is determining the effect of process parameters on surface roughness in two-point incremental sheet metal forming process using the Taguchi method. The experimental ...  Read More ...
Experimental and Numerical Analysis of Bulletproof Armor Made from Polymer Composite Materials
Experimental and Numerical Analysis of Bulletproof Armor Made from Polymer Composite Materials

Jawad Kadhim Oleiwi; Abass Khammas Hussein; Sura Hameed Ahmed

Volume 33, 7A , July 2015, Page 1583-1597

https://doi.org/10.30684/etj.33.7A.4

Abstract
  This work focuses on the preparation of polymer matrix composite specimens by (Hand Lay-Up) method to make bulletproof armor from the unsaturated polyester resin (UP) as a matrix reinforced ...  Read More ...
Stability Improvement Of the (400kV) Iraqi Grid using the best FACTS Devices
Stability Improvement Of the (400kV) Iraqi Grid using the best FACTS Devices

Rashid H. Al-Rubayi; Shaimaa Sh. Abd Alhalim

Volume 33, 7A , July 2015, Page 1598-1618

https://doi.org/10.30684/etj.33.7A.5

Abstract
  Electrical power system has become large and complicated, so it is subjected to sudden changes in load levels. Stability is an important concept which determines the stable operation ...  Read More ...
An Investigation in to the Performances of Fuzzy PD Like and PID-PSO Controllers for Internal Combustion Engine
An Investigation in to the Performances of Fuzzy PD Like and PID-PSO Controllers for Internal Combustion Engine

Talal A. Abdul Wahab; Sabah A. Nassif; Basma Abdullah Abbas

Volume 33, 7A , July 2015, Page 1619-1635

https://doi.org/10.30684/etj.33.7A.6

Abstract
  The Controller design is considered as the important part in the IC engines, to get a stable operation which is the main objective for engine generator set, through controlling the ...  Read More ...
Selecting the Optimum Graphical Method to Find Aggregate Blend Proportions in the Production of HMA
Selecting the Optimum Graphical Method to Find Aggregate Blend Proportions in the Production of HMA

Talal Hussien Fadhil

Volume 33, 7A , July 2015, Page 1636-1655

https://doi.org/10.30684/etj.33.7A.7

Abstract
  The proportions of aggregate directly affect the performance of HMA depending on their shape, texture, and strongly on the gradation.The determination of aggregate proportions depends ...  Read More ...
Cracking Behavior of UHPC Slabs
Cracking Behavior of UHPC Slabs

Hussein Al-Quraishi

Volume 33, 7A , July 2015, Page 1656-1666

https://doi.org/10.30684/etj.33.7A.8

Abstract
  The combination of fibers with traditional reinforcement may be a very interesting design solution to achieve more durable and economical structures. In this study, a total of seven ...  Read More ...
Effect of Plasma Peening on Mechanical Properties and Fatigue life of AL-Alloys 6061-T6
Effect of Plasma Peening on Mechanical Properties and Fatigue life of AL-Alloys 6061-T6

Hussain J.M AL-Alkawi; Dhafir Sadik Al-Fattal; Ahmed Adnan AL-Qaisy

Volume 33, 7A , July 2015, Page 1667-1679

https://doi.org/10.30684/etj.33.7A.9

Abstract
  An Investigation of estimated Mechanical Properties of AL-Alloys 6061-T6, which is one of the most commonly used in industrial applications, has been established experimentally. A new ...  Read More ...
Manufacturing of Sustainable Cellulose Date Palm Fiber Reinforced Cementitious Boards in Iraq
Manufacturing of Sustainable Cellulose Date Palm Fiber Reinforced Cementitious Boards in Iraq

Riyad H. Alanbari; Maan S. Hassan; Ali H. Fakhri

Volume 33, 7A , July 2015, Page 1680-1696

https://doi.org/10.30684/etj.33.7A.10

Abstract
  The present work investigates the suitability of utilizing date palm residues in manufacturing wood-based cementitious boards. It also concerns other environment issues like trying ...  Read More ...
Reservoir Operation by Artificial Neural Network Model ( Mosul Dam –Iraq, as a Case Study)
Reservoir Operation by Artificial Neural Network Model ( Mosul Dam –Iraq, as a Case Study)

Thair S.K; Ayad S. M; Hasan H.M

Volume 33, 7A , July 2015, Page 1697-1714

https://doi.org/10.30684/etj.2015.106873

Abstract
  Reservoir operation forecasting plays an important role in managing water resources systems. Artificial Neural Network (ANN) model was applied for Mosul-Dam reservoir which is located ...  Read More ...
Development of Construction Material Waste Management System
Development of Construction Material Waste Management System

Zeyad S. M. Khaled; Basil S. Alshathr; Ali Hasan Hadi

Volume 33, 7A , July 2015, Page 1715-1730

https://doi.org/10.30684/etj.2015.106878

Abstract
  Construction materials waste management is the process of implementing a strategy that is capable to reduce construction materials waste to the minimum. This research aims at developing ...  Read More ...
Biological Phosphorus and Nitrogen Removal from Wastewater Using Moving Bed Biofilm Reactor (MBBR)
Biological Phosphorus and Nitrogen Removal from Wastewater Using Moving Bed Biofilm Reactor (MBBR)

Mudhaffar S. Al-Zuhairy; Zainab Bahaa; Walaa S. Mizeel

Volume 33, 7A , July 2015, Page 1731-1739

https://doi.org/10.30684/etj.2015.106879

Abstract
  In this research, an experimental study to evaluate nutrient removal from Al-Rustamiyah wastewater by a moving bed biofilm process was investigated.The moving bed biofilm reactorMBBR ...  Read More ...