Optimum Site Selection for Groundwater wells using Integration between GIS and Hydrogeophysical Data
Optimum Site Selection for Groundwater wells using Integration between GIS and Hydrogeophysical Data

Nadia ahmed Aziz; Raghad H. Hasan; Zaidoon T. Abdulrazzaq

Volume 36, 6A , June 2018, Page 596-602

https://doi.org/10.30684/etj.36.6A.1

Abstract
  This paper aim to select the best site to drill a groundwater wells by using of Geographic Information System (GIS) as a tool for decision-making. The study conducted in Fadak farm ...  Read More ...
Metal Flow Control in Producing the Non Symmetrical Parts in Deep Drawing Process
Metal Flow Control in Producing the Non Symmetrical Parts in Deep Drawing Process

Kariem M. Younis; Adil SH. Jaber

Volume 36, 6A , June 2018, Page 603-611

https://doi.org/10.30684/etj.36.6A.2

Abstract
  the quality of the cups drawn in the deep drawing process are secured by the rate of metal flow into the die cavity, efficiently control on the metal flow can reduce and eliminate a ...  Read More ...
Analytical Comparison on Inductive Wireless Power Transfer System for Biomedical Devices
Analytical Comparison on Inductive Wireless Power Transfer System for Biomedical Devices

Suhad H. Jasim

Volume 36, 6A , June 2018, Page 612-619

https://doi.org/10.30684/etj.36.6A.3

Abstract
  This paper presents a comparative analysis for the four basic topologies of inductive link wireless power transmission, thereby allowing designers to select the most appropriate topology ...  Read More ...
The Relationship between Data Transfer Rate and Distance in Power Networks Modems
The Relationship between Data Transfer Rate and Distance in Power Networks Modems

Salih H. Mahmood

Volume 36, 6A , June 2018, Page 620-627

https://doi.org/10.30684/etj.36.6A.4

Abstract
  With the rapid growth of communication networks, reliable and economical communication systems are needed and can be implemented in buildings. PLC uses electrical wiring to transmit ...  Read More ...
Suggested Methods to Solve the Coils Misalignment for the Biomedical Implants
Suggested Methods to Solve the Coils Misalignment for the Biomedical Implants

Saad Mutashar

Volume 36, 6A , June 2018, Page 628-632

https://doi.org/10.30684/etj.36.6A.5

Abstract
  One of the major problems of the inductive coupling link in the biomedical implantable devices is the misalignment between coils. This paper produces two simple suggested methods to ...  Read More ...
Effect of Current and Duty Factor for Different Electrode Shapes on Material Removal Rate in EDM
Effect of Current and Duty Factor for Different Electrode Shapes on Material Removal Rate in EDM

Shukry H. Aghdeab; Nagham G. Ghazy

Volume 36, 6A , June 2018, Page 633-640

https://doi.org/10.30684/etj.36.6A.6

Abstract
  This paper discusses the performance of Electrical Discharge Machining (EDM) process by changing the bottom shape of the electrode, including two stages: designing the electrodes by ...  Read More ...
Effect of Particle Size on Mechanical Properties of the Recycling Compact Disks Reinforced Epoxy
Effect of Particle Size on Mechanical Properties of the Recycling Compact Disks Reinforced Epoxy

Shayma J. Ahmed

Volume 36, 6A , June 2018, Page 641-645

https://doi.org/10.30684/etj.36.6A.7

Abstract
  The recycling of CDs or DVDs (compact disks) as a filler in polymer composites can be used in many engineering applications such as electrical, automobile, and building applications. ...  Read More ...
Influence of Fracture Parameter on the Shear Lips for 080M40 Carbon Steel in Charpy-v Impact Resistance at Different Temperatures
Influence of Fracture Parameter on the Shear Lips for 080M40 Carbon Steel in Charpy-v Impact Resistance at Different Temperatures

Thaer F. ALSultan

Volume 36, 6A , June 2018, Page 646-651

https://doi.org/10.30684/etj.36.6A.8

Abstract
  This article examines the correlation between shape of shear lips and temperature change. Impact toughness properties of Standard Charpy-V samples are evaluated at different temperatures ...  Read More ...
Study Compression and Impact Properties of PMMA Reinforced by Natural Fibers Used in Denture
Study Compression and Impact Properties of PMMA Reinforced by Natural Fibers Used in Denture

Jawad K. Oleiwi; Sihama I. Salih; Hwazen S. Fadhil

Volume 36, 6A , June 2018, Page 652-655

https://doi.org/10.30684/etj.36.6A.9

Abstract
  The fracture in dentures prepared from acrylic resin occurs frequently during the accidental damage or service through heavy occlusal force [1]. Impact failures usually occur out of ...  Read More ...
Evaluation and Improvement Performance of a Boiler in a Thermal Power Plant Using Artificial Neural Network
Evaluation and Improvement Performance of a Boiler in a Thermal Power Plant Using Artificial Neural Network

Hosham S. Anead; Khaliid F. Sultan; Raheel J. Abd-Kadhum

Volume 36, 6A , June 2018, Page 656-663

https://doi.org/10.30684/etj.36.6A.10

Abstract
  This research aims to avoid damage in power plant boiler steam generation by using Artificial Neural Network techniques (ANN) to improve the boiler performance. The training and testing ...  Read More ...
A Comparison Study of Underwater and Land Flexible Manipulators
A Comparison Study of Underwater and Land Flexible Manipulators

Mohammed J. Mohammed

Volume 36, 6A , June 2018, Page 664-671

https://doi.org/10.30684/etj.36.6A.11

Abstract
  New results for experimental comparison of flexible underwater and land manipulator have studied in this research. A new experimental rig and test basin have designed to present the ...  Read More ...
Fatigue Life and Surface Hardening Investigation of Aluminum Shot Peening Process
Fatigue Life and Surface Hardening Investigation of Aluminum Shot Peening Process

Kayser A. Ameen

Volume 36, 6A , June 2018, Page 672-676

https://doi.org/10.30684/etj.36.6A.12

Abstract
  Two different tests are used in order to analyze the shot peening foraluminum 6061-T6 alloys. Stress amplitude versus fatigue life (S-N curves) are established experimentally using ...  Read More ...
Speed Reference Tracking for Separately Excited DC Motor Based ANFIS and Hysteresis Current Control Techniques
Speed Reference Tracking for Separately Excited DC Motor Based ANFIS and Hysteresis Current Control Techniques

Omar T. Mahmood

Volume 36, 6A , June 2018, Page 680-690

https://doi.org/10.30684/etj.36.6A.13

Abstract
  In this work, a closed loop control system has designed to control the speed of separately excited direct current motor (SEDCM) using Fuzzy (Mamdani and Sugeno) and an Adaptive Neuro ...  Read More ...
Effect of Nano BN Addition on the Properties of an Aluminum Metal Matrix Composite
Effect of Nano BN Addition on the Properties of an Aluminum Metal Matrix Composite

Fadhal A. Hashim; Niveen J. Abdulkader; Nibras S. Jasim

Volume 36, 6A , June 2018, Page 691-695

https://doi.org/10.30684/etj.36.6A.14

Abstract
  In the present work, the wear rate and hardness of recycled Aluminum alloy based metal matrix composite that reinforced with nano Boron Nitride with (2%, 4%, 6%, and 8%) weight percentage ...  Read More ...
Parametric Optimization of WEDM in Machining HSS (8X200)
Parametric Optimization of WEDM in Machining HSS (8X200)

Athraa M.S. Ahmed

Volume 36, 6A , June 2018, Page 696-702

https://doi.org/10.30684/etj.36.6A.15

Abstract
  Nontraditional machining processes are used for machining too hard, brittle and strong conductive materials. The aim of this research is to achieve an economic and efficient machining ...  Read More ...