Main Subjects = Engineering
Number of Articles: 628
A Proposed Method for the Sound Recognition Process
Volume 36, 8A , August 2018, , Page 939-945
Abstract
One of the most important issues in the signal-processing world is the issue of sounds differentiations. It has many applications in identifying the sources of the sounds, and many ... Read More ...
Removal of Cobalt (Co(II)) from Aqueous Solution by Amino Functionalized SBA-15
Volume 36, 7A , July 2018, , Page 703-708
Abstract
Mesoporous silica SBA-15 material was synthesized and functionalized by post synthesis method with amino functional group (3-aminopropyltriethoxysilane) to investigate its potential ... Read More ...
Effect of CFRP Layer Orientation on the Behavior of Shear-Strengthened Steel Plate Girders
Volume 36, 7A , July 2018, , Page 709-714
Abstract
The present paper investigates experimentally the impacts of fiber layer orientation on the structural behavior of CFRP strengthened steel-plated girders that are subjected to shear. ... Read More ...
Study the Effect of Nano-Al2O3 and Fiber Glass on Mechanical and Physical Properties of PMMA Composites for Prosthetic Denture
Volume 36, 7A , July 2018, , Page 715-722
Abstract
In the present research, investigate the effect of adding some reinforcing materials which include nano-aluminum oxide (nano-Al2O3) particles that added with different volume fractions ... Read More ...
High Rate Data Processing System of 6x6 MIMO_OFDM Using FPGA Technique with Spatial Algorithm
Volume 36, 7A , July 2018, , Page 723-732
Abstract
OFDM has high spectral Performance and pliability in multipath channel effects while MIMO use another strategy for saving power of transmitter by using multi in multi out antennas to ... Read More ...
Sliding Mode Controller Design for Flexible Joint Robot
Volume 36, 7A , July 2018, , Page 733-741
Abstract
This paper suggests a flexible joint robot operated by brushed Direct Current (DC) motor model. Due to complex high-order, nonlinear dynamical system which operating under parameter’s ... Read More ...
Effect of Corrosion Time on Critical Buckling Load of AISI 304 Columns
Volume 36, 7A , July 2018, , Page 742-747
Abstract
In this work Corrosion buckling interaction behavior of AISI 304 stainless steel circular columns was investigated. Long and intermediate columns diameter of (6 mm) are tested in as ... Read More ...
Effect of Waiting Time before Re-vibration on Mechanical Properties of Fiber Reinforced Concrete
Volume 36, 7A , July 2018, , Page 748-758
Abstract
A knowledge of the concrete vibration after casting have led to improve the mechanical properties of concrete, reduce the deformations due to creep and shrinkage and reduce the concrete ... Read More ...
Multiple Access Chua Chaotic Communication system using Real Orthogonal Matrix Approach
Volume 36, 7A , July 2018, , Page 759-769
Abstract
An alternative to traditional Pseudo-Noise (PN)-Sequences, one-dimension (1D) orthogonal chaotic map sequences, and three dimensional (3D) continuous chaotic systems (x,y,z) are generated ... Read More ...
Multiple Performance Optimization of Carburized Steel Using Taguchi Based Moora Approach
Volume 36, 7A , July 2018, , Page 770-776
Abstract
In this research, a multi-response optimization based on Taguchi method-based MOORA (Multi-response optimization based on ratio analysis) is proposed for carburization process of low ... Read More ...
Intelligent Modeling of Metal Oxide Gas Sensor
Volume 36, 7A , July 2018, , Page 777-783
Abstract
Due to the complexity of the gas detection process, traditional modeling techniques cannot provide accurate modeling performance to reproduce the behavior of this difficult process. ... Read More ...
Internal Model Control Using a Self-Recurrent Wavelet Neural Network Trained by an Artificial Immune Technique for Nonlinear Systems
Volume 36, 7A , July 2018, , Page 784-791
Abstract
This paper presents a Self-Recurrent Wavelet Neural Network (SRWNN)-based Internal Model Control (IMC) for nonlinear systems. As the internal model, a Nonlinear Autoregressive Moving ... Read More ...
Characterization of AA 6061βAlloy Composites Reinforced by Al2O3 Nano Particles Obtained by Stir Casting
Volume 36, 7A , July 2018, , Page 792-797
Abstract
The aim of this work is generated a Nano materials having good mechanical properties for 6061AA-alloy.Fivewt% of Nano particles (Al2O3) (20-30nm grain size) were adoptees (1, 1.5, 2, ... Read More ...
Enhancement the Performance of PV Panel by Using Fins as Heat Sink
Volume 36, 7A , July 2018, , Page 798-805
Abstract
In this paper, theoretical and experimental study of the performance enhancement of PV panels has been presented by utilizing fins for cooling module’s temperature at climate ... Read More ...
Employee Performance Assessment Using Modified Decision Tree
Volume 36, 7A , July 2018, , Page 806-811
Abstract
Decision tree algorithms are famous method in inductive learning and successfully applied for model classification and prediction. Performance evaluation in organization is one of the ... Read More ...
Optimization of Dry Sliding Wear Process Parameters for Al-Mg-Si Hybrid Composites Using Taguchi Method
Volume 36, 7A , July 2018, , Page 812-822
Abstract
The aim of the presents study was to investigates the influence of different sliding velocity 1.4, 2.8, 4.2 m/sec, applied load 5, 10, N and time 10, 20, 30 min on wear rate of Al-Mg-Si ... Read More ...
Optimum Site Selection for Groundwater wells using Integration between GIS and Hydrogeophysical Data
Volume 36, 6A , June 2018, , Page 596-602
Abstract
This paper aim to select the best site to drill a groundwater wells by using of Geographic Information System (GIS) as a tool for decision-making. The study conducted in Fadak farm ... Read More ...
Metal Flow Control in Producing the Non Symmetrical Parts in Deep Drawing Process
Volume 36, 6A , June 2018, , Page 603-611
Abstract
the quality of the cups drawn in the deep drawing process are secured by the rate of metal flow into the die cavity, efficiently control on the metal flow can reduce and eliminate a ... Read More ...
Analytical Comparison on Inductive Wireless Power Transfer System for Biomedical Devices
Volume 36, 6A , June 2018, , Page 612-619
Abstract
This paper presents a comparative analysis for the four basic topologies of inductive link wireless power transmission, thereby allowing designers to select the most appropriate topology ... Read More ...
The Relationship between Data Transfer Rate and Distance in Power Networks Modems
Volume 36, 6A , June 2018, , Page 620-627
Abstract
With the rapid growth of communication networks, reliable and economical communication systems are needed and can be implemented in buildings. PLC uses electrical wiring to transmit ... Read More ...
Suggested Methods to Solve the Coils Misalignment for the Biomedical Implants
Volume 36, 6A , June 2018, , Page 628-632
Abstract
One of the major problems of the inductive coupling link in the biomedical implantable devices is the misalignment between coils. This paper produces two simple suggested methods to ... Read More ...
Effect of Current and Duty Factor for Different Electrode Shapes on Material Removal Rate in EDM
Volume 36, 6A , June 2018, , Page 633-640
Abstract
This paper discusses the performance of Electrical Discharge Machining (EDM) process by changing the bottom shape of the electrode, including two stages: designing the electrodes by ... Read More ...
Effect of Particle Size on Mechanical Properties of the Recycling Compact Disks Reinforced Epoxy
Volume 36, 6A , June 2018, , Page 641-645
Abstract
The recycling of CDs or DVDs (compact disks) as a filler in polymer composites can be used in many engineering applications such as electrical, automobile, and building applications. ... Read More ...
Influence of Fracture Parameter on the Shear Lips for 080M40 Carbon Steel in Charpy-v Impact Resistance at Different Temperatures
Volume 36, 6A , June 2018, , Page 646-651
Abstract
This article examines the correlation between shape of shear lips and temperature change. Impact toughness properties of Standard Charpy-V samples are evaluated at different temperatures ... Read More ...
Study Compression and Impact Properties of PMMA Reinforced by Natural Fibers Used in Denture
Volume 36, 6A , June 2018, , Page 652-655