Keywords = flexural strength
Number of Articles: 27
Assessment of Properties of Composite Boards from Groundnut Shells and Sawdust for their suitability for Structural Applications
Volume 42, Issue 4 , April 2024, , Page 388-397
Abstract
Groundnut shells and sawdust are generated in vast quantities yearly but under-utilized. In developing countries, this situation leads to their disposal by unplanned landfilling, indiscriminate ... Read More ...Waste Rubber Pre-treatments and Their Effects on Compressive and Flexural Strength of Modified SIFCON
Volume 41, Issue 11 , November 2023, , Page 1379-1389
Abstract
Slurry-infiltrated fiber concrete (SIFCON) is a comparatively new and unique steel fiber-reinforced concrete (FRC) form. SIFCON possesses many desirable characteristics, including high ... Read More ...Experimental Study on The Effect of Aspect Ratio on Flexural Behavior of Aluminum Sandwich Composite
Volume 40, Issue 7 , July 2022, , Page 990-995
Abstract
Sandwich composites are one such kind of light-weight composites developed for structural and vehicle body buildings etc. Due to their remarkable features such as high specific strength, ... Read More ...Mechanical Performance of Blended Fly Ash-based Geopolymer Concrete with GGBS and Metakaolin
Volume 40, Issue 5 , May 2022, , Page 819-831
Abstract
One of the most user-friendly alternatives to ordinary concrete is geopolymer concrete(GPC), which achieves the same result. GPC is a unique substance made by activating source materials ... Read More ...Mechanical Properties Prediction of Normal and High Strength Geopolymer Concrete
Volume 39, Issue 12 , December 2021, , Page 1781-1788
Abstract
The production process of cement is the main binder material in concrete usually accompanied by carbon dioxide emission. Therefore, geopolymer concrete (GPC) an alternative binder material ... Read More ...Optimum Steel Fiber Content of High Strength Pozzolime Concrete
Volume 39, Issue 12 , December 2021, , Page 1869-1874
Abstract
Pozzolime is a promising alternative binder, compared to Portland cement because of its low CO2 emission. it is produced by mixing hydrated lime, silica fume, and fly ash. Fiber is ... Read More ...A Study of Some Mechanical and Physical Properties for Palm Fiber/Polyester Composite
Volume 38, 3B , December 2020, , Page 104-114
Abstract
This research has been done by reinforcing the matrix (unsaturated polyester) resin with natural material (date palm fiber (DPF)). The fibers were exposure to alkali treatment before ... Read More ...Flexural and Impact Properties of Epoxy Composites Reinforced with Peanut Shell Particles
Volume 38, 7A , July 2020, , Page 1026-1033
Abstract
Natural materials have been extensively used as reinforcements in polymer matrices instead of non-degradable synthetic reinforcement such as carbon, glass or aramid. The use is because ... Read More ...Influence of Minimum Tension Steel Reinforcement on the Behavior of Singly Reinforced Concrete Beams in Flexure
Volume 38, 7A , July 2020, , Page 1034-1046
Abstract
The requirements of minimum flexural reinforcement in the last decades have been a reason for controversy. The structural behavior of beams in bending is the best way of investigating ... Read More ...Properties of Self-Compacting Cementitious Composite Materials Containing Cement Kiln Dust Powder
Volume 38, 6A , June 2020, , Page 879-886
Abstract
This paper aims to investigate the influence of utilization micro cement kiln dust as a sustainable materials additive in order to reduce the voids and micro cracks in the cementitious ... Read More ...Influence of Recycled Fine Aggregates on Strength Properties of Reactive Powder Mortar
Volume 38, 3A , March 2020, , Page 288-294
Abstract
Although many researchers have done many studies on recycled aggregate concrete, information is very little about the influence of utilizing recycled aggregate in the production of ... Read More ...Analysing Some Mechanical Properties of Cinnamon Powder Reinforced with Polymeric Materials Used in Dental Application
Volume 37, 3A , March 2019, , Page 96-105
Abstract
In the dentures industry, materials must be chosen to have good mechanical properties in order to resist the conditions that may occur in the mouth. A study was conducted to assess ... Read More ...A Comparative Investigation on Mechanical Properties of Various Fibers Reinforced Concrete
Volume 37, 1A , January 2019, , Page 28-36
Abstract
The present work presents an investigation the effect of adding various fiber materials such as (glass, nylon, and carbon) into the concrete mix for inspecting and compare the mechanical ... Read More ...Investigation of Addition Different Fibers on the Performance of Cement Mortar
Volume 36, 9A , September 2018, , Page 957-965
Abstract
This work presents an investigation of possibility incorporate of synthetic fibers (glass, nylon and carbon) at two states (short: 1cm, long: 5cm) effects on the mechanical properties ... Read More ...Preparation and Investigation of Flexural Strength and Impact Strength for Nano Hybrid Composite Materials of the Tri- Polymeric Blend used in Structural Applications
Volume 36, 1B , January 2018, , Page 12-24
Abstract
Current work is aimed to preparation the nanocomposites laminatesof low density and good durability to use in structural applications. So, in thispaper, the preparation and compare ... Read More ...Some Properties of No-Fines Concrete Produced by Using Demolished Concrete as Recycled Coarse Aggregate
Volume 35, 7A , July 2017, , Page 741-748
Abstract
This paper investigate some mechanical properties of no-fines concrete produced by using demolished concrete as coarse aggregate after crushing to different sizes. Different no-fine ... Read More ...Study the Effects of Nano-Materials Addition on Some Mechanical Properties of Cement Mortar
Volume 35, 4A , April 2017, , Page 348-355
Abstract
This research involves nano-materials addition and interaction with cement mortar behavior for many mortar samples under variable curing time with constant water to cement ratio (W/C ... Read More ...Mechanical Properties of Fiberous High Performance Lightweight Aggregate Concrete
Volume 35, 3A , March 2017, , Page 229-238
Abstract
Structural lightweight aggregate concrete solves weight and durability problems in buildings and structures. Recent advanced in material technology have accelerated the development ... Read More ...Effect of Al2O3 Powder on Some Mechanical and Physical Properties for Unsaturated Polyester Resin Hybrid Composites Materials Reinforced by Carbon and Glass Fibers
Volume 34, 12A , December 2016, , Page 2371-2379
Abstract
This research is a study of the effect of Al2O3 powder on physical and mechanical properties of the polymer hybrid composites based on unsaturated polyester resin reinforced with carbon ... Read More ...Effect of Using Plastic and Rubber Wastes as Fine Aggregate on Some Properties of Cement Mortar
Volume 34, 8A , August 2016, , Page 1688-1699
Abstract
This research describes the production of lightweight cement mortar using four types of fine aggregates including chopped rubber tires, chopped plastic wastes, a mixture from the previous ... Read More ...Effect of Micro Powder on Mechanical and Physical Properties of Glass Fiber Reinforced Epoxy Composite
Volume 34, 7A , July 2016, , Page 1402-1414
Abstract
In the present study, composites were prepared by Hand lay-up molding. The composites constituents were epoxy resin as the matrix, 3% volume fractions of Glass Fibers (G.F) as re enforcement ... Read More ...Strength Evaluation of CO2-Cured Cellulose Date Palm Fiber Reinforced Cementitious Boards
Volume 34, 6A , June 2016, , Page 1029-1046
Abstract
In recent years there has been an increasing demand to recycle wastes produced by the agricultural and industrial processing. The aim of this paper is to investigate the suitability ... Read More ...Manufacturing of Sustainable Cellulose Date Palm Fiber Reinforced Cementitious Boards in Iraq
Volume 33, 7A , July 2015, , Page 1680-1696
Abstract
The present work investigates the suitability of utilizing date palm residues in manufacturing wood-based cementitious boards. It also concerns other environment issues like trying ... Read More ...Effect of Nature Materials Powders on Mechanical and Physical Properties of Glass Fiber / Epoxy Composite
Volume 33, 1A , January 2015, , Page 175-197
Abstract
In the present study composites were prepared by Hand lay-up molding. The composites constituents were epoxy resin as the matrix, 6% volume fractions of Glass Fibers (G.F) as reinforcement ... Read More ...Numerically and Experimentally Studying of some Mechanical Properties of the Polyester Matrix Composite Material Reinforced by Jute Fibers
Volume 32, Issue 9 , September 2014, , Page 2235-2247