Volume & Issue: Volume 40, Issue 12, Production & Metallurgy Engineering, December 2022 (, Material Engineering,19 Articles)
Number of Articles: 19
Investigation Nano-coating for the Corrosion Protection of Petroleum storage tanks Steel
Volume 40, Issue 12 , December 2022, Page 1615-1623
Abstract
This work studies the protection from corrosion in the inner surface of petroleum storage tanks by applying nano-coating on the AISI1018 steel type used in these tanks. BNi-2 alloy, ... Read More ...Microstructure and Mechanical Properties of ZK60 Mg Alloy Processed by Cyclic Expansion-Extrusion (CEE) at Different Temperatures
Volume 40, Issue 12 , December 2022, Page 1624-1630
Abstract
In this work, the cyclic expansion extrusion (CEE) process was applied to ZK60 Mg alloy. The correlation between the evolved microstructure and mechanical properties was investigated. ... Read More ...Characterization of the Efficiency of Photo-Catalytic Ultrafiltation PES Membrane Modified with Tungsten Oxide in the Removal of Tinzaparin Sodium
Volume 40, Issue 12 , December 2022, Page 1633-1641
Abstract
One of the polymeric membranes' main limitations is their susceptibility to fouling, lowering the membrane's performance with time. Therefore, incorporating nanomaterials in polymer ... Read More ...Parametric Optimization of Laser Conduction Welding between Stainless Steel 316 and Polyethylene Terephthalate Using Taguchi Method
Volume 40, Issue 12 , December 2022, Page 1642-1649
Abstract
A pulsed Nd:YAG laser with a fiber optic delivery system was used to accomplish a dissimilar joining of 316 stainless steel (SUS316) to polyethylene terephthalate (PET). Laser Conduction ... Read More ...The Impacts of Calcium Ions Substitution in Hydroxyapatite with Neodymium and Zinc on Biological Properties and Osteosarcoma Cells
Volume 40, Issue 12 , December 2022, Page 1650-1658
Abstract
Hydroxyapatite (HA) is one of the important biomaterials in the medical field, especially in bone treatment, because of its biological properties close to human bone. A simple co-precipitation ... Read More ...Obstacle Avoidance and Path Planning of a Wheeled Mobile Robot Using Hybrid Algorithm
Volume 40, Issue 12 , December 2022, Page 1659-1670
Abstract
In the mobile robot workplace, the path planning problem is crucial. Robotic systems employ intelligence algorithms to plan the robot's path from one point to another. This paper proposes ... Read More ...Evaluation of PCL Electrospun Scaffolds Concentration on Metformin Hydrochloride Release Ratio
Volume 40, Issue 12 , December 2022, Page 1671-1682
Abstract
The study investigates the effect of polycaprolactone (PCL) concentration on the metformin hydrochloride (MH) release ratio of electrospun nanofiber scaffolds. Blend and emulsion electrospinning ... Read More ...A Numerical Study of Friction Stir Welding for AA5754 Sheets to Evaluate Temperature Profile and Plastic Strain
Volume 40, Issue 12 , December 2022, Page 1683-1694
Abstract
A full-dimensions 3-D numerical model based on the Lagrangian approach has been employed to predict the peak temperature and the plastic strain distribution in the FSW of (AA5754) joints ... Read More ...Improvement of Erosion Resistance of Aluminum- Copper Alloy Type 2024 by Plasma Nitriding
Volume 40, Issue 12 , December 2022, Page 1695-1701
Abstract
To increase the erosion resistance of 2024 Al alloys, plasma nitriding surface treatment was used. Nitrogen and argon gases are injected into an evacuated chamber until the pressure ... Read More ...Investigating the Effect of Different Parameters on Physical Properties of Metakaolin-Based Geopolymers
Volume 40, Issue 12 , December 2022, Page 1702-1711
Abstract
Recently, geopolymers have received widespread attention due to their ability to completely replace ordinary cement with better efficiency, lower cost, and less damage to the climatic ... Read More ...The Effect of Ceo2 Addition on Transformation Temperatures and Wear Resistance of Cu-Al-Ni Shape Memory Alloys
Volume 40, Issue 12 , December 2022, Page 1712-1722
Abstract
SMAs can switch from one crystallographic structure to another in response to temperature or stress stimuli. When SMAs are exposed to mechanical cyclic stress, they can absorb and discharge ... Read More ...The Effect of Infill Pattern on Tensile Strength of PLA Material in Fused Deposition Modeling (FDM) Process
Volume 40, Issue 12 , December 2022, Page 1723-1730
Abstract
Fused deposition modeling (FDM) is an additive manufacturing (AM) process often used to build geometrically complex prototypes and parts. It is becoming more popular since it improves ... Read More ...Effect of Adding MgO on Microstructure of Zirconia Toughened Alumina (ZTA) Composite for Medical Applications
Volume 40, Issue 12 , December 2022, Page 1731-1743
Abstract
Zirconia toughened alumina (Biolox delta) is a new-generation ceramic with four times the strength of alumina alone, used in artificial joints. The composite ZTA, consisting of 82 wt. ... Read More ...An Investigation on The Effect of Carbon Nanoparticles on The Properties of Carbon Brushes
Volume 40, Issue 12 , December 2022, Page 1744-1756
Abstract
The demand for carbon brushes with specific properties and improvements in production economics in recent years has led to increased interest in metal-graphite composites. Metal matrix ... Read More ...Nanocatalyst for the Degradation of Plastic Waste to Produce Paints
Volume 40, Issue 12 , December 2022, Page 1757-1764
Abstract
Recycling consumed commercial polymers is considered a highly important issue that chemists and engineers must take care of to develop the proper recycling techniques. The main objective ... Read More ...Improving Fatigue Corrosion Resistance of Turbine Blades Using Laser Processing
Volume 40, Issue 12 , December 2022, Page 1765-1774
Abstract
The present paper investigates the nanomaterial coatings effect on turbine blades by laser processing. The present paper explores the impact of laser cladding parameters on the corrosion ... Read More ...Supplier Ranking in Dental Sector Using Integrated Fuzzy (AHP-TOPSIS)
Volume 40, Issue 12 , December 2022, Page 1775-1782
Abstract
Choosing a suitable supplier of materials and equipment in the healthcare sector is essential because it directly affects the patient's health and the organization's effectiveness and ... Read More ...Investigation of Compression and Hardness for UHMWPE Bio-composites as Internal Bone Plate Fixation
Volume 40, Issue 12 , December 2022, Page 1783-1794
Abstract
Bone plates are essential for bone fracture healing because they modify the biomechanical microenvironment at the fracture site to provide the necessary mechanical fixation for fracture ... Read More ...Epoxy-Nanoceramic Composites for 5G Antennas
Volume 40, Issue 12 , December 2022, Page 1795-1802